TADHE U501-20 UV Adhesive for LED Lens & Aluminum Substrate
Product Description
LED LENS / ALUMINUM SUBSTRATE BONDING UV ADHESIVE ,This product is a colorless transparent liquid, mainly made of modified acrylic UV resin. It cures under ultraviolet light with wavelength ≤ 395 nm.
Specifications
Features & Advantages
✅High bonding strength
✅High viscosity
✅Anti-aging & durable
✅Easy to operate
✅Eco-friendly grade
Application: Bonding LED lens to aluminum substrate; bonding & potting sealing for plastics including PMMA, PC, PVC, and metals like aluminum & copper.
Operation Steps
- Clean the bonding surface thoroughly, then apply glue slowly; avoid air bubbles.
- Cure with UV lamp at 10-30cm distance for around 15 seconds. (Exact time depends on your actual UV lamp).
- Increase UV intensity or curing time for thicker glue layers.
- Seal unused adhesive and store at room temperature away from light.
Important Note: The cured resin layer thickness per application must be less than 1 mm.
Recommended UV Curing Light
- 400W (11mW/cm²) UV lamp
- 20W UV flashlight, wavelength ≤395nm
- Other UV lamps that meet curing requirements
UV Adhesive for Lighting & Optoelectronics Industry
1．LED Lens Bonding to Aluminum Substrate
Substrates: PMMA Acrylic Lens / PC Lens + Aluminum Substrate
Requirements: High light transmittance, good surface dryness, excellent weather resistance, passable Double 85 aging test (85℃ / 85%RH), non-stringing for automated dispensing
Process: Automatic syringe dispensing, cure under 395nm UV light for 10–20s. Applied in light source modules of street lights, downlights, panel lights and high bay lights.
2．COB Chip Lens Sealing & Fixing
Substrates: PC Optical Lens, Aluminum Substrate, Copper Circuit
Requirements: Low stress, no impact on light output, moisture-proof sealing to protect chips from moisture erosion.
3．Flexible Light Strip Lens Edge Bonding
Substrates: PVC Flexible Light Strip, PC Transparent Lens
Requirements: Flexible adhesive layer, no delamination upon bending, fast curing to adapt to production lines.
4．Grow Light Lens Assembly
Substrates: PMMA Lens + Aluminum Substrate, for long-term outdoor high-humidity environments
Requirements: UV aging resistance, low yellowing tendency, stable photosynthetic spectrum output.
